Genesee River Watershed Project. Water Quality Analysis of the Black Creek Watershed. Volume 4. Nutrient Concentration and Loading, Identification of Point and Nonpoint Sources of Pollution, Total Maximum Daily Load, and an Assessment of Management Practices using the Soil Water Assessment Tool (SWAT) Model. A report to the USDA.

Abstract

Nearshore Lake Ontario suffers from several beneficial use impairments due to water quality issues from the Genesee River and its contributing tributaries. Segments of Black Creek located in the Lower Genesee River basin are listed as impacted on the New York State 303(d) list because of excess sediment, nutrient, and bacteria losses. Sources of these pollutants from the Black Creek watershed include improperly managed cropland and pastures, dairy manure application, and effluent discharges from wastewater treatment plants. An assessment of the Black Creek watershed was undertaken to determine the nutrient and sediment contribution of Black Creek to the Genesee River and to determine sources of nutrients and sediment loss geospatially within the watershed. To accomplish this task, a multifaceted, integrated approach was taken by combining stream monitoring, segment analysis, and hydrologic modeling [Soil and Water Assessment Tool (SWAT)]. The annual losses (June 2010 through May 2011) of total phosphorus (TP), total nitrogen (TN), and total coliform bacteria from the Black Creek watershed were 16.5 MT/yr, 349.4 MT/yr, and 7.0E15 CFU/yr, respectively, where most of the losses occurred in the upper portion of the watershed. Impacted tributaries (Bigelow Creek and Spring Creek) had the highest areal loads of nutrients and bacteria and were a focus for remediation. More than 70% of the TP load was found to be due to anthropogenic sources including but not limited to manure applications from Confined Animal Feeding operations, the Bergen wastewater treatment plant, and nonpoint agricultural practices throughout the watershed. Sediment loss, on the other hand, was the highest in the downstream reaches of Black Creek where 73% of the total sediment load (8,360.6 MT/yr) occurred due to excessive flooding and stream bank erosion during events. These findings were used to calibrate a SWAT model for Black Creek that simulated the impact of implementing several Best Management Practices (BMPs) to reduce phosphorus and sediment loads. Individual BMPs reduced TP loads from Black Creek at Lower BC anywhere from 0 to 28% and sediment 0 to 84%. A holistic approach to watershed remediation using a combination of several effective BMPs focusing on major contributors of phosphorus and sediment reduced TP 28% and total suspended solids (TSS) 73%. This remedial action plan, if implemented, can reach a water quality target of 65 ?g P/L proposed by the Department of Environmental Conservation, which would reduce the annual TP concentration from 79.6 ?g P/L to 38.3 ?g P/L. This scenario can be used to determine an appropriate Total Maximum Daily Load for Black Creek that will help attain the ultimate goal of reducing the impairments of nearshore Lake Ontario.